Physical Controllers: Difference between revisions

From Experimental Game Cultures
Jump to navigation Jump to search
Content deleted Content added
Line 21: Line 21:
Uses a ~3 Dollar RFID Reader (RC522)
Uses a ~3 Dollar RFID Reader (RC522)
Worked best with Arduino Uno.
Worked best with Arduino Uno.

'''
/*
* Initial Author: ryand1011 (https://github.com/ryand1011)
*
* Reads data written by a program such as "rfid_write_personal_data.ino"
*
* See: https://github.com/miguelbalboa/rfid/tree/master/examples/rfid_write_personal_data
*
* Uses MIFARE RFID card using RFID-RC522 reader
* Uses MFRC522 - Library
* -----------------------------------------------------------------------------------------
* MFRC522 Arduino Arduino Arduino Arduino Arduino
* Reader/PCD Uno/101 Mega Nano v3 Leonardo/Micro Pro Micro
* Signal Pin Pin Pin Pin Pin Pin
* -----------------------------------------------------------------------------------------
* RST/Reset RST 9 5 D9 RESET/ICSP-5 RST
* SPI SS SDA(SS) 10 53 D10 10 10
* SPI MOSI MOSI 11 / ICSP-4 51 D11 ICSP-4 16
* SPI MISO MISO 12 / ICSP-1 50 D12 ICSP-1 14
* SPI SCK SCK 13 / ICSP-3 52 D13 ICSP-3 15
*
* More pin layouts for other boards can be found here: https://github.com/miguelbalboa/rfid#pin-layout
*/

#include <SPI.h>
#include <MFRC522.h>

#define RST_PIN 9 // Configurable, see typical pin layout above
#define SS_PIN 10 // Configurable, see typical pin layout above
#define LEDPIN 2
#define BUZZPIN 3

MFRC522 mfrc522(SS_PIN, RST_PIN); // Create MFRC522 instance

//*****************************************************************************************//
void setup() {
Serial.begin(9600); // Initialize serial communications with the PC
SPI.begin(); // Init SPI bus
mfrc522.PCD_Init(); // Init MFRC522 card
Serial.println(F("Read personal data on a MIFARE PICC:")); //shows in serial that it is ready to read
pinMode(LEDPIN, OUTPUT);
pinMode(BUZZPIN, OUTPUT);
}

//*****************************************************************************************//
void loop() {

// Prepare key - all keys are set to FFFFFFFFFFFFh at chip delivery from the factory.
MFRC522::MIFARE_Key key;
for (byte i = 0; i < 6; i++) key.keyByte[i] = 0xFF;

//some variables we need
byte block;
byte len;
MFRC522::StatusCode status;

//-------------------------------------------

// Reset the loop if no new card present on the sensor/reader. This saves the entire process when idle.
if ( ! mfrc522.PICC_IsNewCardPresent()) {
return;
}

// Select one of the cards
if ( ! mfrc522.PICC_ReadCardSerial()) {
return;
}

Serial.println("CARD ID:");
digitalWrite(LEDPIN, HIGH);

//mfrc522.PICC_DumpDetailsToSerial(&(mfrc522.uid)); //dump some details about the card

for(int i=0; i < sizeof(mfrc522.uid.uidByte); i++){
Serial.print(mfrc522.uid.uidByte[i]);
tone(BUZZPIN, mfrc522.uid.uidByte[i]*60 + 100, 200);

digitalWrite(LEDPIN, LOW);

for(int j = 0; j < mfrc522.uid.uidByte[i]; j++){

if(j > 10)
continue;
digitalWrite(LEDPIN, HIGH);
delay(20);
digitalWrite(LEDPIN, LOW);
delay(20);
}

delay(300);
}

Serial.println("\n");
delay(1000);
digitalWrite(LEDPIN, LOW);
//mfrc522.PICC_DumpToSerial(&(mfrc522.uid)); //uncomment this to see all blocks in hex

//-------------------------------------------


return;

Serial.print(F("Name: "));



byte buffer1[18];

block = 4;
len = 18;

//------------------------------------------- GET FIRST NAME
status = mfrc522.PCD_Authenticate(MFRC522::PICC_CMD_MF_AUTH_KEY_A, 4, &key, &(mfrc522.uid)); //line 834 of MFRC522.cpp file
if (status != MFRC522::STATUS_OK) {
Serial.print(F("Authentication failed: "));
Serial.println(mfrc522.GetStatusCodeName(status));
return;
}

status = mfrc522.MIFARE_Read(block, buffer1, &len);
if (status != MFRC522::STATUS_OK) {
Serial.print(F("Reading failed: "));
Serial.println(mfrc522.GetStatusCodeName(status));
return;
}

//PRINT FIRST NAME
for (uint8_t i = 0; i < 16; i++)
{
if (buffer1[i] != 32)
{
Serial.write(buffer1[i]);
}
}
Serial.print(" ");

//---------------------------------------- GET LAST NAME

byte buffer2[18];
block = 1;

status = mfrc522.PCD_Authenticate(MFRC522::PICC_CMD_MF_AUTH_KEY_A, 1, &key, &(mfrc522.uid)); //line 834
if (status != MFRC522::STATUS_OK) {
Serial.print(F("Authentication failed: "));
Serial.println(mfrc522.GetStatusCodeName(status));
return;
}

status = mfrc522.MIFARE_Read(block, buffer2, &len);
if (status != MFRC522::STATUS_OK) {
Serial.print(F("Reading failed: "));
Serial.println(mfrc522.GetStatusCodeName(status));
return;
}

//PRINT LAST NAME
for (uint8_t i = 0; i < 16; i++) {
Serial.write(buffer2[i] );
}


//----------------------------------------

Serial.println(F("\n**End Reading**\n"));

delay(1000); //change value if you want to read cards faster

mfrc522.PICC_HaltA();
mfrc522.PCD_StopCrypto1();
}'''


== SEEDUINO XIAO ==
== SEEDUINO XIAO ==

Revision as of 11:15, 7 June 2023

Hand holding sensor

Measure the voltage - could be a chain of humans that hold hands, Arduino measure the voltage and smoothes it out with a capacitor. The LED is just to show the difference in voltage:

The Arduino connects to 5Volts, Ground and Analog 0

The Arduino connects to 5Volts, Ground and Analog 0

The Breadboard, purple wires are for holding in your hands. Capacitor to smooth out the voltage.

The Breadboard, purple wires are for holding in your hands. Capacitor to smooth out the voltage.


The code

File:Rfid.zip

RFID Tag Reader

Can be used to read RFID Cards/ or write to them. Uses a ~3 Dollar RFID Reader (RC522) Worked best with Arduino Uno.

SEEDUINO XIAO

A super small Arduino/Micropython device. About 15 Euros.

Seeduino

Connecting it to Arduino IDE: https://wiki.seeedstudio.com/Seeed_Arduino_Boards/