Experimental Game Cultures - User contributions [en]

3D Printing

2025-05-28T11:28:00Z

Egc students: /* 2. Slice the Model */

== Printing using the Bambulab A1 ==

[[File:Bambu.jpeg|thumb|200px|Excellent prints❤️]]

=== 1. Find a 3D Model ===
You can go to [https://makerworld.com makerworld.com] to search for 3D models.
There is already an account saved in '''Firefox''', so you can just log in.

Download as:
'''STL file''' – normal 3D format or a '''3MF file''' – sometimes has settings already inside

=== 2. Slice the Model ===
On the PC, the program '''Bambu Studio''' is already installed.
You use it to prepare the file for printing:
* Open the STL or 3MF file inside Bambu Studio
* Change settings if you need (for example print quality or material)
* Click on '''“Slice”''' – this makes the file ready for the printer
* Then you can send it directly to the printer (if connected) or save it to SD card

See more here:

<youtube>https://www.youtube.com/watch?v=zRE3PStojYk&pp=0gcJCdgAo7VqN5tD</youtube>

=== 3. Start the Print ===
* Very important: '''Clean the print plate''' before printing. Use isopropyl alcohol and a soft cloth
* Check that filament is loaded
* Start the print on the printer screen or from the Bambu Studio

=== 4. After Printing ===
* Let the plate cool down before you take the print off
* Clean the plate again so it stays in good condition

== Printing using the Prusa - obsolete now :-( ==

For students that have done the 3D printing workshop and signed the usage agreement, feel free to use the 3D Printer via Octoprint (IP is on the printer).

Login with your username and upload the GCode you want to print. Supervise the print to prevent damage to the printer and fires.

[[File:3DPrinting.png]]

== Info Slides ==

The slides of the workshop can be downloaded here:

[[File:3DPrintWorkshopEGC22.pdf]]

3D Printing

2025-05-28T11:27:52Z

Egc students: /* Printing using the Bambulab A1 */

== Printing using the Bambulab A1 ==

[[File:Bambu.jpeg|thumb|200px|Excellent prints❤️]]

=== 1. Find a 3D Model ===
You can go to [https://makerworld.com makerworld.com] to search for 3D models.
There is already an account saved in '''Firefox''', so you can just log in.

Download as:
'''STL file''' – normal 3D format or a '''3MF file''' – sometimes has settings already inside

=== 2. Slice the Model ===
On the PC, the program '''Bambu Studio''' is already installed.
You use it to prepare the file for printing:
* Open the STL or 3MF file inside Bambu Studio
* Change settings if you need (for example print quality or material)
* Click on '''“Slice”''' – this makes the file ready for the printer
* Then you can send it directly to the printer (if connected) or save it to SD card

See more here:
<youtube>https://www.youtube.com/watch?v=zRE3PStojYk&pp=0gcJCdgAo7VqN5tD</youtube>

=== 3. Start the Print ===
* Very important: '''Clean the print plate''' before printing. Use isopropyl alcohol and a soft cloth
* Check that filament is loaded
* Start the print on the printer screen or from the Bambu Studio

=== 4. After Printing ===
* Let the plate cool down before you take the print off
* Clean the plate again so it stays in good condition

== Printing using the Prusa - obsolete now :-( ==

For students that have done the 3D printing workshop and signed the usage agreement, feel free to use the 3D Printer via Octoprint (IP is on the printer).

Login with your username and upload the GCode you want to print. Supervise the print to prevent damage to the printer and fires.

[[File:3DPrinting.png]]

== Info Slides ==

The slides of the workshop can be downloaded here:

[[File:3DPrintWorkshopEGC22.pdf]]

3D Printing

2025-05-28T11:26:32Z

Egc students: /* Printing using the Bambulab A1 */

== Printing using the Bambulab A1 ==

[[File:Bambu.jpeg|thumb|200px|Excellent prints❤️]]

=== 1. Find a 3D Model ===
You can go to [https://makerworld.com makerworld.com] to search for 3D models.
There is already an account saved in '''Firefox''', so you can just log in.

Download as:
'''STL file''' – normal 3D format or a '''3MF file''' – sometimes has settings already inside

=== 2. Slice the Model ===
On the PC, the program '''Bambu Studio''' is already installed.
You use it to prepare the file for printing:
* Open the STL or 3MF file inside Bambu Studio
* Change settings if you need (for example print quality or material)
* Click on '''“Slice”''' – this makes the file ready for the printer
* Then you can send it directly to the printer (if connected) or save it to SD card

=== 3. Start the Print ===
* Very important: '''Clean the print plate''' before printing. Use isopropyl alcohol and a soft cloth
* Check that filament is loaded
* Start the print on the printer screen or from the Bambu Studio

=== 4. After Printing ===
* Let the plate cool down before you take the print off
* Clean the plate again so it stays in good condition

<youtube>https://www.youtube.com/watch?v=zRE3PStojYk&pp=0gcJCdgAo7VqN5tD</youtube>

== Printing using the Prusa - obsolete now :-( ==

For students that have done the 3D printing workshop and signed the usage agreement, feel free to use the 3D Printer via Octoprint (IP is on the printer).

Login with your username and upload the GCode you want to print. Supervise the print to prevent damage to the printer and fires.

[[File:3DPrinting.png]]

== Info Slides ==

The slides of the workshop can be downloaded here:

[[File:3DPrintWorkshopEGC22.pdf]]

3D Printing

2025-05-28T11:25:21Z

Egc students: /* Printing using the Bambulab A1 */

== Printing using the Bambulab A1 ==

[[File:Bambu.jpeg|thumb|200px|Excellent prints❤️]]

=== 1. Find a 3D Model ===
You can go to [https://makerworld.com makerworld.com] to search for 3D models.
There is already an account saved in '''Firefox''', so you can just log in.

Download as:
'''STL file''' – normal 3D format or a '''3MF file''' – sometimes has settings already inside

=== 2. Slice the Model ===
On the PC, the program '''Bambu Studio''' is already installed.
You use it to prepare the file for printing:
* Open the STL or 3MF file inside Bambu Studio
* Change settings if you need (for example print quality or material)
* Click on '''“Slice”''' – this makes the file ready for the printer
* Then you can send it directly to the printer (if connected) or save it to SD card

=== 3. Start the Print ===
* Very important: '''Clean the print plate''' before printing. Use isopropyl alcohol and a soft cloth
* Check that filament is loaded
* Start the print on the printer screen or from the Bambu Studio

=== 4. After Printing ===
* Let the plate cool down before you take the print off
* Clean the plate again so it stays in good condition

== Printing using the Prusa - obsolete now :-( ==

For students that have done the 3D printing workshop and signed the usage agreement, feel free to use the 3D Printer via Octoprint (IP is on the printer).

Login with your username and upload the GCode you want to print. Supervise the print to prevent damage to the printer and fires.

[[File:3DPrinting.png]]

== Info Slides ==

The slides of the workshop can be downloaded here:

[[File:3DPrintWorkshopEGC22.pdf]]

3D Printing

2025-05-28T11:25:07Z

Egc students: /* Printing using the Bambulab A1 */

== Printing using the Bambulab A1 ==

[[File:Bambu.jpeg|thumb|200px|Excellent prints❤️]]

=== 1. Find a 3D Model ===
You can go to [https://makerworld.com makerworld.com] to search for 3D models.
There is already an account saved in '''Firefox''', so you can just log in.

Download a:
* '''STL file''' – normal 3D format
or a
* '''3MF file''' – sometimes has settings already inside

=== 2. Slice the Model ===
On the PC, the program '''Bambu Studio''' is already installed.
You use it to prepare the file for printing:
* Open the STL or 3MF file inside Bambu Studio
* Change settings if you need (for example print quality or material)
* Click on '''“Slice”''' – this makes the file ready for the printer
* Then you can send it directly to the printer (if connected) or save it to SD card

=== 3. Start the Print ===
* Very important: '''Clean the print plate''' before printing. Use isopropyl alcohol and a soft cloth
* Check that filament is loaded
* Start the print on the printer screen or from the Bambu Studio

=== 4. After Printing ===
* Let the plate cool down before you take the print off
* Clean the plate again so it stays in good condition

== Printing using the Prusa - obsolete now :-( ==

For students that have done the 3D printing workshop and signed the usage agreement, feel free to use the 3D Printer via Octoprint (IP is on the printer).

Login with your username and upload the GCode you want to print. Supervise the print to prevent damage to the printer and fires.

[[File:3DPrinting.png]]

== Info Slides ==

The slides of the workshop can be downloaded here:

[[File:3DPrintWorkshopEGC22.pdf]]

File:Bambu.jpeg

2025-05-28T11:24:20Z

Egc students:

3D Printing

2025-05-28T11:23:15Z

Egc students: /* Printing in the department */

== Printing using the Bambulab A1 ==

=== 1. Find a 3D Model ===
You can go to [https://makerworld.com makerworld.com] to search for 3D models.
There is already an account saved in '''Firefox''', so you can just log in.

Download a:
* '''STL file''' – normal 3D format
or a
* '''3MF file''' – sometimes has settings already inside

=== 2. Slice the Model ===
On the PC, the program '''Bambu Studio''' is already installed.
You use it to prepare the file for printing:
* Open the STL or 3MF file inside Bambu Studio
* Change settings if you need (for example print quality or material)
* Click on '''“Slice”''' – this makes the file ready for the printer
* Then you can send it directly to the printer (if connected) or save it to SD card

=== 3. Start the Print ===
* Very important: '''Clean the print plate''' before printing. Use isopropyl alcohol and a soft cloth
* Check that filament is loaded
* Start the print on the printer screen or from the Bambu Studio

=== 4. After Printing ===
* Let the plate cool down before you take the print off
* Clean the plate again so it stays in good condition

== Printing using the Prusa - obsolete now :-( ==

For students that have done the 3D printing workshop and signed the usage agreement, feel free to use the 3D Printer via Octoprint (IP is on the printer).

Login with your username and upload the GCode you want to print. Supervise the print to prevent damage to the printer and fires.

[[File:3DPrinting.png]]

== Info Slides ==

The slides of the workshop can be downloaded here:

[[File:3DPrintWorkshopEGC22.pdf]]

3D Printing

2025-05-28T11:22:47Z

Egc students: /* Printing using the Bambulab A1 */

== Printing using the Bambulab A1 ==

=== 1. Find a 3D Model ===
You can go to [https://makerworld.com makerworld.com] to search for 3D models.
There is already an account saved in '''Firefox''', so you can just log in.

Download a:
* '''STL file''' – normal 3D format
or a
* '''3MF file''' – sometimes has settings already inside

=== 2. Slice the Model ===
On the PC, the program '''Bambu Studio''' is already installed.
You use it to prepare the file for printing:
* Open the STL or 3MF file inside Bambu Studio
* Change settings if you need (for example print quality or material)
* Click on '''“Slice”''' – this makes the file ready for the printer
* Then you can send it directly to the printer (if connected) or save it to SD card

=== 3. Start the Print ===
* Very important: '''Clean the print plate''' before printing. Use isopropyl alcohol and a soft cloth
* Check that filament is loaded
* Start the print on the printer screen or from the Bambu Studio

=== 4. After Printing ===
* Let the plate cool down before you take the print off
* Clean the plate again so it stays in good condition

== Printing in the department ==

For students that have done the 3D printing workshop and signed the usage agreement, feel free to use the 3D Printer via Octoprint (IP is on the printer).

Login with your username and upload the GCode you want to print. Supervise the print to prevent damage to the printer and fires.

[[File:3DPrinting.png]]

== Info Slides ==

The slides of the workshop can be downloaded here:

[[File:3DPrintWorkshopEGC22.pdf]]

3D Printing

2025-05-28T10:29:36Z

Egc students:

== Printing using the Bambulab A1 ==

[https://makerworld.com/en/makerlab/parametricModelMaker?designId=1055250&from=model_page&modelName=Screw+Generator.scad&scadUrl=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FUS4c3761813497f0%2Fmsfile%2F2025-02-15_caf8c26e678e4.scad%3Fat%3D1748427914%26exp%3D1748428214%26key%3Da41c73b9269ee0e267b06f87fa02681a%26uid%3D3724732068&unikey=fd7fa4bc-e4cd-4d3b-8854-33fb6d9384a4 Nice Screw Generator]

== Printing in the department ==

For students that have done the 3D printing workshop and signed the usage agreement, feel free to use the 3D Printer via Octoprint (IP is on the printer).

Login with your username and upload the GCode you want to print. Supervise the print to prevent damage to the printer and fires.

[[File:3DPrinting.png]]

== Info Slides ==

The slides of the workshop can be downloaded here:

[[File:3DPrintWorkshopEGC22.pdf]]

3D Printing

2025-05-28T10:29:05Z

Egc students:

== Printing using the Bambulab A1 ==

Nice Screw Generator
[https://makerworld.com/en/makerlab/parametricModelMaker?designId=1055250&from=model_page&modelName=Screw+Generator.scad&scadUrl=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FUS4c3761813497f0%2Fmsfile%2F2025-02-15_caf8c26e678e4.scad%3Fat%3D1748427914%26exp%3D1748428214%26key%3Da41c73b9269ee0e267b06f87fa02681a%26uid%3D3724732068&unikey=fd7fa4bc-e4cd-4d3b-8854-33fb6d9384a4]

== Printing in the department ==

For students that have done the 3D printing workshop and signed the usage agreement, feel free to use the 3D Printer via Octoprint (IP is on the printer).

Login with your username and upload the GCode you want to print. Supervise the print to prevent damage to the printer and fires.

[[File:3DPrinting.png]]

== Info Slides ==

The slides of the workshop can be downloaded here:

[[File:3DPrintWorkshopEGC22.pdf]]